|
|
@ -0,0 +1,15 @@ |
|
|
|
|
|
What?, Why?, Price |
|
|
|
|
|
100 W heater, Get the acid on temperature, 7$ |
|
|
|
|
|
3 W compressor, Move the acid arround the PCB (accelerates etching and gives better quality), 5.5 $ |
|
|
|
|
|
200 ohm resistors (300 pcs), For UV LEDs., 2.2 $ |
|
|
|
|
|
100 UV LEDs, For the UV light. I tested those already., 15.7 € |
|
|
|
|
|
18 V, 2 A power supply for the UV light., 4.6 $ |
|
|
|
|
|
Aquarium silicon, Glue the glass plates together for the cuvette., ? |
|
|
|
|
|
Glass for cuvette, Cuvette., ? |
|
|
|
|
|
Wooden plate, Mounting the LEDs inside an old scanner., ? |
|
|
|
|
|
Old scanner, Base for the UV ligth.,0 |
|
|
|
|
|
Drill stand, Drilling holes in the PCB without breaking the drills., 33 $ |
|
|
|
|
|
Driller set, Drill holes with different sizes., 10 € |
|
|
|
|
|
Iron trichloride (FeCl3), Etches away copper (which is not protected by plastic)., 15.3 € |
|
|
|
|
|
Canister, Canister to put old FeCl3 (can kill bacteria because of the copper)., ? |
|
|
|
|
|
Soda (NaOH), Etch away plastic cracked by the UV light., 2 € |
