|
|
@ -10,30 +10,53 @@ use <open_box.scad> |
|
|
|
///////////////////////////////////////////////////////////////////////////////// |
|
|
|
// Vars |
|
|
|
///////////////////////////////////////////////////////////////////////////////// |
|
|
|
length = 50; |
|
|
|
width = 80; |
|
|
|
allowance_pcb = 1; |
|
|
|
allowance_glass = 0.5; |
|
|
|
width = 50 + 2*allowance_pcb; |
|
|
|
length = 80 + 2*allowance_pcb; |
|
|
|
height = 45; |
|
|
|
thickness = 10; |
|
|
|
allowance = 1; |
|
|
|
thickness = 5; |
|
|
|
lid_depth = 5; |
|
|
|
bolt_diameter = 4; |
|
|
|
bolt_diameter = 5.5; // According to the Farnell datasheet |
|
|
|
bolt_spacing = 5; |
|
|
|
my_color = "SteelBlue"; |
|
|
|
my_color = "DarkRed"; |
|
|
|
glass_width = 26; |
|
|
|
glass_height = 2 + allowance_glass; |
|
|
|
|
|
|
|
difference(){ |
|
|
|
|
|
|
|
union(){ |
|
|
|
// Using my open box module for creating a simple box |
|
|
|
color(my_color, 0.8) |
|
|
|
open_box(length, width, height, thickness, allowance); |
|
|
|
open_box(length, width, height, thickness); |
|
|
|
|
|
|
|
// Creating a depening for the lid |
|
|
|
color(my_color, 0.9) |
|
|
|
*translate([thickness/2, thickness/2, height]) |
|
|
|
cube([length + 2*allowance + thickness, width + 2*allowance + thickness, lid_depth]); |
|
|
|
// Cylindric holes for the PCB |
|
|
|
*color(my_color, 1.0) translate([0, 0, thickness/2]){ |
|
|
|
translate([thickness + bolt_spacing, bolt_spacing + thickness, 0]) |
|
|
|
translate([thickness/2, thickness/2, height+1]) |
|
|
|
cube([length + thickness, width + thickness, lid_depth+1]); |
|
|
|
|
|
|
|
// Cylindric holes for the PCBs |
|
|
|
color(my_color, 1.0) translate([0, 0, thickness/2]){ |
|
|
|
translate([thickness + bolt_spacing, thickness + bolt_spacing, 0]) |
|
|
|
cylinder(r=bolt_diameter/2, h=thickness/2+1); |
|
|
|
translate([length + thickness - bolt_spacing, thickness + bolt_spacing, 0]) |
|
|
|
cylinder(r=bolt_diameter/2, h=thickness/2+1); |
|
|
|
translate([length + thickness - bolt_spacing, width + thickness - bolt_spacing, 0]) |
|
|
|
cylinder(r=bolt_diameter/2, h=thickness/2+1); |
|
|
|
translate([thickness + bolt_spacing, width + thickness - bolt_spacing, 0]) |
|
|
|
cylinder(r=bolt_diameter/2, h=thickness/2+1); |
|
|
|
} |
|
|
|
*translate([0,0,0]) |
|
|
|
cube([90, thickness, 50]); |
|
|
|
|
|
|
|
color(my_color, 0.6) union(){ |
|
|
|
// Slots for glass slide |
|
|
|
// Slot in the back |
|
|
|
translate([length + thickness/2, thickness + (width - glass_width)/2, (height + thickness)/2]) |
|
|
|
cube([thickness, glass_width, glass_height]); |
|
|
|
// Slot in the front |
|
|
|
translate([-1, thickness + (width - glass_width)/2, (height + thickness)/2]) |
|
|
|
cube([thickness + 2, glass_width, glass_height]); |
|
|
|
} |
|
|
|
} |
|
|
|
|
|
|
|
color(my_color, 0.8) |
|
|
|
translate([thickness/2, thickness/2, height + 10]) |
|
|
|
import("lid.stl"); |
|
|
|