You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
65 lines
2.1 KiB
65 lines
2.1 KiB
7 years ago
|
/////////////////////////////////////////////////////////////////////////////////
|
||
|
|
// Male part of the box.
|
||
|
|
//
|
||
|
|
// Author: Maximilian Stiefel
|
||
|
|
// Last modification: 31.07.2017
|
||
|
|
/////////////////////////////////////////////////////////////////////////////////
|
||
|
|
|
||
|
|
/////////////////////////////////////////////////////////////////////////////////
|
||
|
|
// Includes
|
||
|
|
/////////////////////////////////////////////////////////////////////////////////
|
||
|
|
|
||
|
|
// Dimesnions
|
||
|
|
include <dimensions.scad>
|
||
|
|
use <dimensions.scad>
|
||
|
|
|
||
|
|
// Module for raw box without any lids
|
||
|
|
include <box.scad>
|
||
|
|
use <box.scad>
|
||
|
|
|
||
|
|
// Module for screw holes
|
||
|
|
include <screw_holes.scad>
|
||
|
|
use <screw_holes.scad>
|
||
|
|
|
||
|
|
////////////////////////////////////////////////////////////////////////////////
|
||
|
|
// Vars
|
||
|
|
/////////////////////////////////////////////////////////////////////////////////
|
||
|
|
|
||
|
|
// Set minimum angle of a fragment
|
||
|
|
$fa = 0.5;
|
||
|
|
// Set minimum size of a fragment
|
||
|
|
$fs = 0.5;
|
||
|
|
|
||
|
|
|
||
|
|
////////////////////////////////////////////////////////////////////////////////
|
||
|
|
// Action
|
||
|
|
/////////////////////////////////////////////////////////////////////////////////
|
||
|
|
color(myColor1)
|
||
|
|
{
|
||
|
|
translate([0, 0, housing_outside_height/2])
|
||
|
|
rotate([180, 0, 0])
|
||
|
|
union()
|
||
|
|
{
|
||
|
|
rotate([180, 0, 0])
|
||
|
|
{
|
||
|
|
// Draw cylinders for mortise joint
|
||
|
|
translate([0, 0, (mortise_joint_height - mortise_joint_cone_height - allowance05)/2 - 0.01])
|
||
|
|
screw_holes(housing_inside_width + housing_thickness/2, housing_inside_depth + housing_thickness/2, mortise_joint_dia - allowance05, mortise_joint_height - mortise_joint_cone_height - allowance05);
|
||
|
|
|
||
|
|
// Draw cones
|
||
|
|
for(x=[-0.5,+0.5])
|
||
|
|
for(y=[-0.5,+0.5])
|
||
|
|
translate([x*(housing_inside_width + housing_thickness/2), y*(housing_inside_depth + housing_thickness/2), mortise_joint_height - mortise_joint_cone_height/2 - allowance05 - 0.01])
|
||
|
|
cylinder(r1 = (mortise_joint_dia - allowance05)/2, r2 = 1, mortise_joint_cone_height, center = true);
|
||
|
|
}
|
||
|
|
difference()
|
||
|
|
{
|
||
|
|
// Draw hole box
|
||
|
|
box();
|
||
|
|
// Cut off half of it
|
||
|
|
translate([0, 0, -housing_outside_height/4])
|
||
|
|
cube([housing_outside_width + 1, housing_outside_depth + 1, housing_outside_height/2 + 0.01], center = true);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|