/////////////////////////////////////////////////////////////////////////////////
// Male part of the box.
//
// Author:              Maximilian Stiefel
// Last modification:   31.07.2017
/////////////////////////////////////////////////////////////////////////////////

/////////////////////////////////////////////////////////////////////////////////
// Includes
/////////////////////////////////////////////////////////////////////////////////

// Dimesnions
include <dimensions.scad>
use <dimensions.scad>

// Module for raw box without any lids
include <box.scad>
use <box.scad>

// Module for screw holes
include <screw_holes.scad>
use <screw_holes.scad>

////////////////////////////////////////////////////////////////////////////////
// Vars
/////////////////////////////////////////////////////////////////////////////////

// Set minimum angle of a fragment
$fa = 0.5;
// Set minimum size of a fragment
$fs = 0.5;


////////////////////////////////////////////////////////////////////////////////
// Action
/////////////////////////////////////////////////////////////////////////////////
color(myColor1)
{
translate([0, 0, housing_outside_height/2])
rotate([180, 0, 0])
union()
{
rotate([180, 0, 0])
{
// Draw cylinders for mortise joint
translate([0, 0, (mortise_joint_height - mortise_joint_cone_height - allowance05)/2 - 0.01])
screw_holes(housing_inside_width + housing_thickness/2, housing_inside_depth + housing_thickness/2, mortise_joint_dia - allowance05, mortise_joint_height - mortise_joint_cone_height - allowance05);

// Draw cones
for(x=[-0.5,+0.5])
for(y=[-0.5,+0.5])
translate([x*(housing_inside_width + housing_thickness/2), y*(housing_inside_depth + housing_thickness/2), mortise_joint_height - mortise_joint_cone_height/2 - allowance05 - 0.01])
cylinder(r1 = (mortise_joint_dia - allowance05)/2, r2 = 1, mortise_joint_cone_height, center = true);
}
difference()
{
	// Draw hole box
	box();
	// Cut off half of it
	translate([0, 0, -housing_outside_height/4])
	cube([housing_outside_width + 1, housing_outside_depth + 1, housing_outside_height/2 + 0.01], center = true);
}
}
}