SaMcam_hw

Author	SHA1	Message	Date
Maximilian Stiefel	c95de37597	Added BOM to output	3 years ago
Maximilian Stiefel	4c598dd473	Updated README.md	3 years ago
Maximilian Stiefel	22376d9caf	Warped up	3 years ago
Maximilian Stiefel	2ca80e398c	Needed to relocate the ESP because of the antenna	3 years ago
Maximilian Stiefel	3d5a81c842	Rectified mistake how UART RX/TX wered connected	3 years ago
Maximilian Stiefel	27a8d8c8fb	Layout DRC passed	3 years ago
Maximilian Stiefel	06296fcf28	Progress	3 years ago
Maximilian Stiefel	6e5471b18b	Placing more vias and layout finetuning	3 years ago
Maximilian Stiefel	1d7f914b76	Only fine tuning of layout left	3 years ago
Maximilian Stiefel	29ada6e7dd	Close to finnishing up the layout	3 years ago
Maximilian Stiefel	65bfa82979	Almost all components arranged	3 years ago
Maximilian Stiefel	a1948c3fdf	Added 3D model fo 100 uF cap fine-tuned motor driver designs	4 years ago
Maximilian Stiefel	01801e64bf	Roughly done with layout design of one motor driver	4 years ago
Maximilian Stiefel	f6d8f0d6ae	Added lots of 3D packages and continued w/ component placement	4 years ago
Maximilian Stiefel	066d0f252d	Smaller components, bigger PCB, more 3D models	4 years ago
Maximilian Stiefel	f1c9286db1	Started with PCB desgin	4 years ago
Maximilian Stiefel	58c670adba	Removing old schematic	4 years ago
Maximilian Stiefel	79739f2919	Replaced buck converter since the old one could not be sourced	4 years ago
Maximilian Stiefel	faedc32c64	Progress that needs to be safed	4 years ago
Maximilian Stiefel	3023842424	Basically done with 5 V power supply	4 years ago
Maximilian Stiefel	c549844274	Basically done with stepper driver	4 years ago
Maximilian Stiefel	5cb5091085	First commit	4 years ago

22 Commits (master)