First version of simple cable tie mount

cable_tie_mount/cable_tie_mount.scad

@@ -0,0 +1,26 @@
+$fn=50;
+l_lower = 20;
+h_lower = 4;
+l_higher = 10;
+h_higher = 1;
+h = 8;
+l_slot = 5;
+h_slot = 3;
+b_cable_tie = 5;
+difference () {
+  hull(){
+    cube([l_lower, l_lower, h_lower], center=true);
+    translate([0,0, h - h_higher/2])
+    cube([l_higher, l_higher, h_higher], center=true);
+  }
+  for(rot = [0:1:1]){
+    rotate([0, 0, rot*90])
+    translate([0, 0, h_lower/2])
+    difference() {
+      rotate([90, 0, 0])
+      cylinder(r=b_cable_tie/2, h=l_lower*2, center=true);
+      translate([0, 0, -b_cable_tie/2])
+      cube([b_cable_tie, 2*l_lower+0.01, b_cable_tie], center=true);
+    }
+  }
+}