Modified README.md, added LICENSE and updated gallery.

LICENSE

@@ -0,0 +1,26 @@
+    Copyright (c) 2021 Maximilian Stiefel. All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without modification,
+    are permitted provided that the following conditions are met:
+
+    1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+    2. Redistributions in binary form must reproduce the above copyright notice,
+    this list of conditions and the following disclaimer in the documentation
+    and/or other materials provided with the distribution.
+
+    3. Neither the name of the copyright holder nor the names of its contributors
+    may be used to endorse or promote products derived from this software without
+    specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+    AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+    IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+    ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+    LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+    DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+    SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+    CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+    OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+    USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

README.md

@@ -0,0 +1,24 @@
+Repository for my personal random 3D models created w/ [OpenSCAD](https://openscad.org/).
+
+### Gallery
+
+Magnetic knife block extension for 20 mm x 5 mmm x 2 mm magnets.
+[![Knife block extension.](./kblock_ext/kblock_ext.png)](./kblock_ext)
+
+Cable tie cable mount for screws and double-sided tape.
+[![Cable tie mount screws.](./cable_tie_mount/cable_tie_mount_screws.png)](./cable_tie_mount)
+[![Cable tie mount.](./cable_tie_mount/cable_tie_mount.png)](./cable_tie_mount)
+
+Cable passage for guiding 6 mm² cables (PG-7) through an outside wall into the
+house. The two parts need to be welded w/ acetone.
+[![Cable passage.](./cable_passage/cable_passage_bottom.png)](./cable_passage)
+[![Cable passage.](./cable_passage/cable_passage_top.png)](./cable_passage)
+
+Battery clamp cover, to make batteries IP2X safe.
+[![Battery clamp cover.](./battery_clamp_cover/battery_clamp_cover.png)](./battery_clamp_cover)
+
+Cover for x8 blade fuse holder to avoid unintentional contact.
+[![Cover for x8 blade fuse holder.](./cover_blade_fuse_8/cover_blade_fuse_8.png)](./cover_blade_fuse_8)
+
+Cover for x4 blade fuse holder to avoid unintentional contact.
+[![Cover for x4 blade fuse holder.](./cover_blade_fuse_4/cover_blade_fuse_4.png)](./cover_blade_fuse_4)