|
|
|
What?, Why?, Price
|
|
|
|
100 W heater, Get the acid on temperature (accelerates etching and improves quality)., 7$
|
|
|
|
3 W compressor, Move the acid arround the PCB (accelerates etching and gives better quality)., 5.5 $
|
|
|
|
200 ohm resistors (300 pcs), For UV LEDs., 2.2 $
|
|
|
|
100 UV LEDs, For the UV light. I tested those already., 15.7 €
|
|
|
|
18 V, 2 A power supply for the UV light., 4.6 $
|
|
|
|
Aquarium silicon, Glue the glass plates together for the cuvette., ?
|
|
|
|
Glass for cuvette, Cuvette where PCBs are etched., ?
|
|
|
|
Wooden plate, Mounting the LEDs inside an old scanner., ?
|
|
|
|
Old scanner, Base for the UV ligth.,0
|
|
|
|
Drill stand, Drilling holes in the PCB without breaking the drills., 33 $
|
|
|
|
Driller set, Drill holes with different sizes., 10 €
|
|
|
|
Iron trichloride (FeCl3), Etches away copper (which is not protected by plastic)., 15.3 €
|
|
|
|
Canister, Canister to put old FeCl3 (can kill bacteria because of the copper)., ?
|
|
|
|
Soda (NaOH), Etch away plastic cracked by the UV light., 2 €
|
|
|
|
Some 3D printed parts, We can most likely print them at Ångström., 0 €
|
|
|
|
Developing trays, Developing PCBs and clean them in there., 25 €
|