Repository for my personal random 3D models created w/ [OpenSCAD](https://openscad.org/).

### Gallery

Magnetic knife block extension for 20 mm x 5 mmm x 2 mm magnets.
[![Knife block extension.](./kblock_ext/kblock_ext.png)](./kblock_ext)

Cable tie cable mount for screws and double-sided tape.
[![Cable tie mount screws.](./cable_tie_mount/cable_tie_mount_screws.png)](./cable_tie_mount)
[![Cable tie mount.](./cable_tie_mount/cable_tie_mount.png)](./cable_tie_mount)

Cable passage for guiding 6 mm² cables (PG-7) through an outside wall into the
house. The two parts need to be welded w/ acetone.
[![Cable passage.](./cable_passage/cable_passage_bottom.png)](./cable_passage)
[![Cable passage.](./cable_passage/cable_passage_top.png)](./cable_passage)

Battery clamp cover, to make batteries IP2X safe.
[![Battery clamp cover.](./battery_clamp_cover/battery_clamp_cover.png)](./battery_clamp_cover)

Cover for x8 blade fuse holder to avoid unintentional contact.
[![Cover for x8 blade fuse holder.](./cover_blade_fuse_8/cover_blade_fuse_8.png)](./cover_blade_fuse_8)

Cover for x4 blade fuse holder to avoid unintentional contact.
[![Cover for x4 blade fuse holder.](./cover_blade_fuse_4/cover_blade_fuse_4.png)](./cover_blade_fuse_4)